2003 CHMER CW322S Wire EDM
€0.00Description
CHMER CW-322S Wire EDM – Submerged
Machine Body:
Axis: X: 13.7"
Y: 9.87"
Z: 8.6"
Auxiliary Table Travel
U: 2.4”
V: 2.4”
Maximum Workpiece Dimensions: 27.6” x 22” x 8.5”
Maximum Workpiece Weight(Lbs.): 550
X-Y Axis Feed Rate: Max. 800 mm/min.
Drive System (5 Axis): AC Servo Motor (5 Axis)
Wire Diameter (Range): .006” – .012”
Maximum Wire Feed Rate: 300 mm / sec.
Wire Tension: 300 – 2500g
Maximum Taper Angle: 14.5º / 3.15 inches
Machine Dimensions: 86.6” x 83.8” x 82.6”
Net Weight: 5,500 Lbs.
Dielectric System:
Tank Capacity: 480 Liters
Filter Element: Paper
Ion exchange Resin: 14L (Submerged)
Conductivity Control: Auto
Fluid Temperature Control: Standard
Outside Dimensions: 800mm x 2,120mm x 1,350 mm (WD 700mm)
Net Weight (Without Water): 300 kg.
Power Supply Unit:
Circuit System: Power MOS Transistor
Maximum Output Current: 25 Amps
IP Select: 10 Steps
Off Time Select: 50 Steps
CNC Unit:
Data Input: Keyboard, RS-232C, 3.5” Floppy Disk
Display: 14” Color
Control System: 32 bit, 1-CPU, Semi Closed Loop Servo System
Control Axis: X,Y,U,V,Z (5 Axes)
Setting Unit: 0.0001 mm
Maximum Command Value: 9999.999 mm
Interpolation: Linear / Circular
Command System: ABS / Inc.
Machining Feed Control: Servo / Constant Feed
Scaling: 0.001 – 9999.999
Auto 2nd Cut System: Retrace and Auto-Change Machining Data
Outside Dimensions/Weight: 820mm D x 600mm W x 1,800mm H / 450 kg.
Total Power Input: 3 Phase 220V ± 5% / 13 kVa
