2004 CHMER CW360S Wire EDM

2004 CHMER CW360S Wire EDM

orCall 888-289-3367


Machine Body: Axis Travels:                                                   X:         14.1" (360mm) Auxiliary Table Travel Maximum Workpiece Dimensions:                 31.5” x 22” x 8.5”         (800 x 560 x 215mm) Drive System (5 Axis):                                    AC Servo Motor (Panasonic) w/ Precision Rotary Encoders Wire Diameter (Range):                                 .006  – .012“    (.15 - .3mm)    ( Manufacturers Rates Cutting Speed:             24 sq. in/hr w/ .010” Brass Wire (Megacut D) Maximum Taper Angle:                                  14.5º / 3.25 inches (Max taper w/special guides 30º) System Dimensions:                                       82.6” x 110.2” x 80.7” (2,100 x 2,800 x 2,050mm) Net Weight:                                                     5,500 lbs.        (2,500kg)         ( Dielectric System: Tank Capacity:                                               340 Liters (90 gallons) Power Supply Unit (CHS): Circuit System:                                               Power MOS Transistor CNC Unit: Data Input:                                                      Keyboard, RS-232C, USB Control System:                                              Pentium Control with Panasonic AC Servo and Precision Rotary Encoders – closed loop. Setting Unit:                                                    0.0001 mm Minimum input Interpolation:                                                   Linear / Circular Scaling:                                                           0.001 – 9999.999 Auto 2 nd Cut System:                                      Retrace and Auto-Change Machining Data Outside Dimensions/Weight:                          33” D x 24” W x 74” H / 990 lbs ± 5% / 13 kVa


Y9.84"    (250mm)
Z8.6"      (220mm)
U2.4”      (60mm)
V2.4”      (60mm)
Maximum workpiece weight (lbs.)660      (300kg)
X-y axis feed rateMax. 800 mm/min.
Minimum table resolution.000040”          (.001mm)
Maximum wire feed rate300 mm / sec.
Wire tension300 – 2500g
Filter elementPaper (2)
Ion exchange resin14L (Submerged)
Conductivity controlAuto
Fluid temperature controlStandard
Net weight (without water)300 kg. (660 lbs)
Outside dimensions36” x 60” x 36”
Maximum output current25 Amps
Ip select10 Steps
Off time select50 Steps
Display15” TFT
Control axis5 Axes
Maximum command value9999.999 mm
Command systemABS / Inc.
Machining feed controlServo / Constant Feed
Total power input3 Phase 220V