American Owned
The 4-axis Fast Wire EDMs are full wire EDMs that can cut shapes and tapers just like conventional brass wire EDMs. The only feature it cannot do is auto thread the wire. This is a manual operation. However, with average cut times for a new piece of .007" dia. molybdenum wire around 80-100 hours, if it is a long cut like large profiles or tall keyways, there is not much auto...
These EDMs (Fast Wire EDMs) can cut the 3-D printed parts by following the support structure as shown here, thus reducing secondary machining to remove these supports. In addition, the 4-axis Fast Wire EDMs can cut any wire EDM shape by using the DXF files loaded through the USB or LAN ports - or programmed on the included CAD system.
The new large format EDMMax 818W was designed to accommodate the very large fixture and build plates being printed today. Builds and build plates up to 78" high can be cut insid...
EDM Network, Inc. in collaboration with I-Smart of Taiwan introduces the first pure water-based Fast Wire EDM. The new FC45HW Fast Wire EDM is a horizontal cutting, submerged Fa...
The new FC45HW Fast Wire EDM is a patented design that cuts the inverted build plate horizontally submerged in deionized water, so that the delicate cut parts float to the bottom of the work tank into a catch basket for easy retrieval. The FC model is available in two sizes: 400 x 400 mm and 625 x 625 mm to handle most build plates. An optional loading cart is available to i...
The 4-axis Fast Wire EDMs are full wire EDMs that can cut shapes and tapers just like conventional brass wire EDMs. The only feature it cannot do is auto thread the wire. This is a manual operation. However, with average cut times for a new piece of .007" dia. molybdenum wire around 80-100 hours, if it is a long cut like large profiles or tall keyways, there is not much auto...
These EDMs (Fast Wire EDMs) can cut the 3-D printed parts by following the support structure as shown here, thus reducing secondary machining to remove these supports. In addition, the 4-axis Fast Wire EDMs can cut any wire EDM shape by using the DXF files loaded through the USB or LAN ports - or programmed on the included CAD system.
