CHMER ZNZ SERIES H75Z

H32Z ZNC Drilling EDM Series Small hole drilling EDMs are designed for drilling less than 6.0mm diameter holes, especially 1.0mm, or even less than 0.5mm, in hard metal. These jobs are not possible to be done by conventional drills. The maximum drilling depth of the ZNC series is 345mm. Features Drill small diameter holes through hardened tool steel and carbide. Depth to diameter ratios>100(i.e.,.020 dia.>2" deep.) Enter on curved or angled surfaces. Dielectric is distilled water. 3-axis DROs. Edge finding and hole center finding. Inch/ metric switchable. Z depth programmable. 99 built-in power settings plus operator programmed power settings (s-codes). Drill small diameter holes through hardened tool steel and carbide. Depth to diameter ratios>100(i.e.,.020 dia.>2" deep.) Enter on curved or angled surfaces. Dielectric is distilled water. 3-axis DROs. Edge finding and hole center finding. Inch/ metric switchable. Z depth programmable. 99 built-in power settings plus operator programmed power settings (s-codes). Specifications ModelUnitH32Z Max. Work Piece (WxDxH) mm/inch 850×400×400 / 33.4×15.7×15.7 Max. Work Piece Weight kg/lb 100 / 220 Table travels (XxY) mm/inch 350×250 / 13.7×9.8 Ram Servo Travel (Z1) mm/inch 340 / 13.3 Work Head Travel (Z2) mm/inch 200 / 7.8 Guide Travel mm/inch 150 / 5.9 Max. Length of Tube Electrode mm/inch 400 / 15.7 Dist. between SP work table mm/inch 5-400 / 0.2-15.7 Machine Size mm/inch 1100×1100×2200 / 43.3×43.3×86.6 Net Weight kg/lb 600 / 1320