CHMER ZNZ SERIES H32Z

H32Z ZNC Drilling EDM Series Small hole drilling EDMs are designed for drilling less than 6.0mm diameter holes, especially 1.0mm, or even less than 0.5mm, in hard metal. These jobs are not possible to be done by conventional drills. The maximum drilling depth of the ZNC series is 345mm. Features Drill small diameter holes through hardened tool steel and carbide. Depth to diameter ratios>100(i.e.,.020 dia.>2" deep.) Enter on curved or angled surfaces. Dielectric is distilled water. 3-axis DROs. Edge finding and hole center finding. Inch/ metric switchable. Z depth programmable. 99 built-in power settings plus operator programmed power settings (s-codes). Drill small diameter holes through hardened tool steel and carbide. Depth to diameter ratios>100(i.e.,.020 dia.>2" deep.) Enter on curved or angled surfaces. Dielectric is distilled water. 3-axis DROs. Edge finding and hole center finding. Inch/ metric switchable. Z depth programmable. 99 built-in power settings plus operator programmed power settings (s-codes). Specifications ModelUnitH32ZH43ZH54ZH75Z Max. Work Piece (WxDxH) mm 610×420×250 990×460×355 1075×540×395 1630×690×595 Max. Work Piece Weight kg 120 450 1000 2600 Table travels (XxY) mm 300×250 400×300 550×400 700×550 Max Electrode Guide Movement [Z Axis Travel] mm --- 200 200 200 Max Electrode Guide Movement [W Axis Travel] mm 345 345 345 345 Guide Travel mm/inch 150 / 5.9 150 / 5.9 150 / 5.9 150 / 5.9 Max Length of Electrode mm 400 400 400 400 Dist. from Worktable to Guide mm 100~250 5~355 45~395 145~595 Machine Dimensions mm 1523×1183×2158 1888×1344×2155 3661×1531×2369 3980×2007×2374 Net Weight kg 830 1070 2080 2980