|
 |
|
 |
|
AW
Series (High Precision Wire EDMs )with Linear Motors |
Linear Motor Drive
The AW series with Linear Motor Drive guarantees positioning accuracy for the life of the EDM. Linear motors reduce backlash to near zero plus increase the positioning speed by over five times that of traditional ball screw drives. Linear motor drives also reduce vibration to achieve the best possible surface finishes |
CNC
Controller |
Adopt
in-house CNC PC Base controller
that provides state of
the art features such as: |
 |
Remote
Monitoring |
|
CF
memory card |
|
Rotary B-axis (6th axis) |
|
User Friendly in-house software
for easy learning and free
update. |
|
|
|
Cutting
Edge Remote Monitoring Function |
|
Double
Air Tunnel |
Double-Tunnel
design Power Supply enhances
the efficiency of thermo
convection and extends
life span of electronic
components. Module cicuit
box offers quick maintenance
and least repair time. |
|
|
|
Multi-Functional
Corner Aid |
Apply
auto eroding power shift
when approaching inner/outer
corner to obtain sharp
corners and small radii. |
|
|
|
Revolutionary
AWT system |
Capable
of threading 0.1mm brass
wire in water and at break
location, no need to return
back to start point and
trace back. Concise design
of AWT makes maintenance
easy and reduces down time. |
|
|
|
Roundness
Inspection |
Isolated
Lower Arm design for highest
machining accuracy and
avoid water leakage when
sealing worn out. |
|
|
|
Consumable
Life Chart |
The
bar chart indicates the
life status of each consumable
and time for replacement
to ensure machine working
in ideal condition. |
|
|
|
AMS
in-house Rotary B-Axis |
6th
Axis Continuous Cut or
Indexing (optional) with
in-house submergable Rotary
B-Axis for turns and burns. |
|
|
|
AC-μ |
Super
Fine Finish eroding circuit
and water volume regulator
ensure stable working condition
of fine-finish so as to
obtain best surface roughness. |
|
|
|
| SPECIFICATIONS: |
| MACHINE
BODY |
AW3SL |
AW5SL |
AW6SL |
AW9SL |
X,
Y Travel
|
mm |
370x270 |
560x360 |
650x450 |
920x620 |
| U,
V, Z Travel |
mm |
100x100x260 |
100x100x300 |
120x120x300 |
200x200x400 |
| Max.
size of workpiece |
mm |
L750xW550xH260 |
L950xW650xH300 |
L1000xW700xH300 |
L1300xW1000xH400 |
| Max.
weight of workpiece |
kg |
400 |
500 |
600 |
1000 |
| Max.
X,Y Rapid Traverse |
mm |
800
mm/min |
800
mm/min |
800
mm/min |
800
mm/min |
| Motor
Drive System |
|
AC
servo motor
17 bit/130,000 pulse |
AC
servo motor
17 bit/130,000 pulse |
AC
servo motor
17
bit/130,000 pulse |
AC
servo motor
17
bit/130,000 pulse |
| Wire
diameter range |
mm |
F0.15~0.3/
|
F0.15~0.3/
|
F0.15~0.3/
|
F0.15~0.3/
|
| Max.
wire feed rate |
mm/in |
300mm/sec |
300mm/sec |
300mm/sec |
300mm/sec |
| Wire
tension |
gf |
200~2500 |
200~2500 |
200~2500 |
200~2500 |
| Taper
angle |
mm |
±21°/100
mm |
±21°/100
mm |
±21°/140
mm |
±21°/140
mm |
| N.W
(Incl. Pwr Supply) |
kg |
4600 |
5200 |
5400 |
8000 |
| CNC
POWER SUPPLY: |
| Circuit
System |
power
MOS Transistor |
| Max.Output
Current |
30A |
| Data
Input |
Keyboard/Touch
Screen/Ethernet |
| Power
Requirement |
220V ± 5%
/ 3 Phase / 50 ~ 60 HZ |
| Memory |
IDE Card
Reader + CF Card |
| Memory Capacity |
128 MB |
| Screen Display |
15" TFT |
| Measurement Resolution |
0.1 μm |
| Control System |
Closed Loop |
| Max. Command value |
± 9999.999 |
| DIELECTRIC
SUPPLY
UNIT: |
| Machine
Body |
AW3S |
AW5S |
AW6S |
AW9S |
| Filter
Material |
Paper |
Paper |
Paper |
Paper |
| Conductivity
Control |
Auto |
Auto |
Auto |
Auto |
| Dielectric
Temp. Control |
Auto
(option) |
Auto
(option) |
Auto
(option) |
Auto
(option) |
| Control
Axis |
850
(L) |
950
(L) |
1050
(L) |
2000 (L) |
| N.W |
250 Kg |
320
Kg |
350
Kg |
600
Kg |
STANDARD
ACCESSORIES:
Auto vertical alignment jig x 1 set
AWT (Auto Wire Thread er) x 1 set
2-in-1 AVR + Transformer x 1 set
|
Water Cooler x 1 set
X&Y axis Glass Scale |
OPTIONAL
ACCESSORIES:
AC-μ Super
Finish Circuit
30 Kg Jumbo Wire Spooler
Bridge Ruler
Rotary B-Axis (6th axis Function)
Touch Screen
|
0.1mm wire cutting device
Heidenhain 0.5μ X&Y
Glass Scale
CE Compliance
Auto Dielectric Temp Control
|
INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE.
|
 |
|
|
|
|
 |
|
|
|
|
|
