Welcome Visitor, you can login or create an account

CHMER ZNZ SERIES H32Z

H32Z
€0.00


REQUEST MORE INFORMATION
or call 888-BUY-EDMS (289-3367)

Description

ZNC Drilling EDM Series

Small hole drilling EDMs are designed for drilling less than 6.0mm diameter holes, especially 1.0mm, or even less than 0.5mm, in hard metal. These jobs are not possible to be done by conventional drills. The maximum drilling depth of the ZNC series is 345mm.

Features
  • Drill small diameter holes through hardened tool steel and carbide.
  • Depth to diameter ratios>100(i.e.,.020 dia.>2" deep.)
  • Enter on curved or angled surfaces.
  • Dielectric is distilled water.
  • 3-axis DROs.
  • Edge finding and hole center finding.
  • Inch/ metric switchable.
  • Z depth programmable.
  • 99 built-in power settings plus operator programmed power settings (s-codes).
Specifications
ModelUnitH32ZH43ZH54ZH75Z
Max. Work Piece (WxDxH) mm 610×420×250 990×460×355 1075×540×395 1630×690×595
Max. Work Piece Weight kg 120 450 1000 2600
Table travels (XxY) mm 300×250 400×300 550×400 700×550
Max Electrode Guide Movement [Z Axis Travel] mm --- 200 200 200
Max Electrode Guide Movement [W Axis Travel] mm 345 345 345 345
Guide Travel mm/inch 150 / 5.9 150 / 5.9 150 / 5.9 150 / 5.9
Max Length of Electrode mm 400 400 400 400
Dist. from Worktable to Guide mm 100~250 5~355 45~395 145~595
Machine Dimensions mm 1523×1183×2158 1888×1344×2155 3661×1531×2369 3980×2007×2374
Net Weight kg 830 1070 2080 2980


We appreciate your interest in EDM Network Inc.,
a representative will contact you.