Welcome Visitor, you can login or create an account

CHMER RX1283S Submerged Type


or call 888-BUY-EDMS (289-3367)


CHMER RX1283S Large Travel Wire EDM

  • The RX1283S is a large travel wire EDM using precision ball screws, Panasonic drives and optional precision glass scale feedback.  Precision optical rotary encoders are standard. 


  • The Z-axis can be increased to either 400mm (15.7") or up to 500mm (19.6") as required to accomodate larger workpieces. 


  • The unique CHMER automatic wire threader (AWT) is especially suited for these large travel wire machines in that in the event of a wire break in the middle of a large cut the CHMER AWT does not need to go back to the start point, rethread, dry run back to the start, then resume the cut which is typical of most AWTs on the market, thus saving time and money. 


  • The T-frame design of the RX series also allows for extra weight capacity versus compound table design as well as space savings - smaller footprint.


X,Y axis mm 1200x800
U,V,Z travel mm 120x120x300
Max. size of working piece (WxDxH) mm 1550x1100x295
Max. weight of working piece kgs 4000
XY Feed Rate mm/min Max.800
Motor system axis AC servo motor
Wire Diameter Range mm ¢0.15~¢0.3 (¢0.25)
Max. Wire Feed Rate mm/sec 300
Wire Tension gf 300-2500
Max. taper angle(°) - ±21°/130(Wide Angle nozzle,DA+DB=15mm)
Outside dimension (WxDxH) mm 4350x4100x2300
N.W(including power and coolant system) kgs 15000
Coolant tank system L 3000

We appreciate your interest in EDM Network Inc.,
a representative will contact you.