Welcome Visitor, you can login or create an account

CHMER RX1063F Flushing Type

RX1063F
€0.00


REQUEST MORE INFORMATION
or call 888-BUY-EDMS (289-3367)

Description

CHMER RX1063F Large Travel Wire EDM

  • The RX1063F is a large travel wire EDM using precision ball screws, Panasonic drives and optional precision glass scale feedback.  Precision optical rotary encoders are standard. 

 

  • The open design of the F model allows for very large work pieces that can overhang the table on three sides.      The Z-axis can be increased to either 400mm (15.7") or up to 500mm (19.6") as required to accomodate larger workpieces.

 

  • The unique CHMER automatic wire threader (AWT) is especially suited for these large travel wire machines in that in the event of a wire break in the middle of a large cut the CHMER AWT does not need to go back to the start point, rethread, dry run back to the start, then resume the cut which is typical of most AWTs on the market, thus saving time and money. 

 

  • The T-frame design of the RX series also allows for extra weight capacity versus compound table design as well as space savings - smaller footprint.

 

Specifications
ModelUnitRX1063F FLUSHING TYPE
X,Y axis mm 1000x600
U,V,Z travel mm 150x150x300
Max. size of working piece (WxDxH) mm 1450x900x295
Max. weight of working piece kgs 3000
XY Feed Rate mm/min Max. 800
Motor system axis AC Servo Motor
Wire Diameter Range mm ¢0.15~¢0.3 (¢0.25)
Max. Wire Feed Rate mm/sec 300
Wire Tension gf 300-2500
Max. taper angle(°) - ±21°/140(Wide Angle nozzle,DA+DB=15mm)
Outside dimension (WxDxH) mm 2700x3000x2200
N.W(including power and coolant system) kgs 6500
Coolant tank system L 650


We appreciate your interest in EDM Network Inc.,
a representative will contact you.