CHMER EZ Series CM545Z
CM545Z
€0.00
Description
ZNC Die Sinker EDM Series
Programmable CNC control; an average power output circuit design as well as traditional machine, it brings a steady, low electrode wear and fine finish processing on the job and more.
Features
- Adopted ac servo motor design in Z-axis free of confusion about motor brush replacement.
- 15" TFT LCD monitor
- Programmable cnc control; an average power output ciruit design as well as traditional machine, it brings a steady, low electrode wear and fine finish processing on the job, and more.
- Built in anti-arc protection.
| Specifications |
| Model | Unit | CM545Z |
|---|
| Table size (WxD) |
mm/inch |
800×500/31.5×19.7 |
| Table travel (XxY) |
mm/inch |
500×400/19.7×15.7 |
| U,V axis travel (OB) |
mm |
±5 |
| Work tank size (WxDxH) |
mm/inch |
1250×700×500/49.2×27.6×19.7 |
| Ram travel (Z1) |
mm/inch |
500/19.7 |
| Distance form RAM platen work table |
mm/inch |
200~700/7.9~27.6 |
| Max. electrode weight (without OB) |
kg/lb |
300/660 |
| Max. electrode weight (with OB) |
kg/lb |
15/33 |
| Max. workpiece weight |
kg/lb |
1500/3300 |
| Outside dimensions (WxDxH) |
mm/inch |
3380×2310×2650/133.07×99.9×104.3 |
| Weight |
kg/lb |
3200/7040 |
| For Dielectric |
- |
D545 |
| Power Supply Unit |
| Model | Unit | 50EZ | 75EZ | 50B Booster | 75B Booster |
|---|
| Max. machining current |
A |
50 |
75 |
50 |
75 |
| Max. power input |
KVA |
4 |
5 |
4 |
5 |
| Max. machining speed |
mm3/min |
350 |
550 |
350 |
550 |
| Electrode wear rate |
% |
0.2 |
0.2 |
- |
- |
| Best surface roughness |
μm/Ra |
0.45/0.2 (OB) |
0.45/0.2 (OB) |
- |
- |
| Outside dimensions |
mm |
620×720×1860 |
620×720×1860 |
450x470x1650 |
450x470x1650 |
| Weight |
kg/lb |
200/440 |
240/528 |
200/440 |
240/528 |
|
| Dielectric |
| Model | Unit | D545 |
|---|
| Volume |
L |
720 |
| Filter |
method |
Paper filter |
| Pump Power |
HP×set |
0.5×2 |
| Weight |
kg/lb |
110/242 |
| Outside dimensions |
mm/inch |
1800x800x500/70.8x31.4x19.6 |
|
|
