CHMER High Speed Linear Motor Drive | A6040L
A6040L
€0.00
Description
Chmer A6040 L
- 3-Axis High Speed Linear Drive Die Sinker EDM
- All-in-one design to save occupied space by 10%
- Highly rigid column moving structure design attached with X, Y, Z axis Linear Motors to gain high speed, backlash-free, high precision machining.
- Cutting speed can be increased up to 4 times and high responsiveness possible by Linear Motor and air balance system. It can have good machining result on tiny and deep hole, also rib job.
- Friendly conversation window in available. Suitable working condition easily and quickly come up by just select the type of E code.
- Revolutionary Energy Saving HSC and ESC. Machining speed is enhanced by over 30% under identical low wear rate through controllable discharge wave.
| Specifications |
| Model | Unit | A6040L |
|---|
| Work Table Size (W×D) |
mm |
800x500 |
| Work Tank Size (W×D×H) |
mm |
1200×740×450 |
| Max. Job Load Size (W×D×H) |
mm |
1050×700×300 |
| Table Travel (X,Y) |
mm |
600×400 |
| Table Travel (Z) |
mm |
350 |
| X,Y,Z Axis Drive |
mm |
X,Y,Z Axis By Linear Motor |
| Distance from Ram platen to work table |
mm |
250~600 |
| Max. Electrode Weight |
kg |
50 |
| Max. Work-piece Weight |
kg |
1500 |
| Outside Dimensions (W×D×H) |
mm |
2100×2150×2260 |
| Net Weight |
kg |
3000 |
| Pneumatic Requirement |
kgf/cm<sup>2</sup> |
6 |
| For Dielectric Tank |
-- |
DA64 |
| Power Supply Unit |
| Model | Unit | 50N | 75N | -- | -- |
|---|
| Max. Machining Current |
A |
50 |
75 |
-- |
-- |
| Max. Power Input |
KVA |
5 |
6 |
-- |
-- |
| Electrode Wear Rate |
% |
0.2 |
0.2 |
-- |
-- |
| Bset Surface Roughness |
μm/Ra |
0.25 |
0.25 |
-- |
-- |
| Outside Dimensions (W×D×H) |
mm |
Built in |
Built in |
-- |
-- |
| Weight |
kg |
Built in |
Built in |
-- |
-- |
|
| Dielectric |
| Model | Unit | DA64 |
|---|
| Volume |
L |
635 |
| Filter |
method |
Paper Filter |
| Power |
HP |
0.5 |
| Weight |
kg |
Built in |
| Outside Dimensions |
mm |
Built in |
|
|
