Welcome Visitor, you can login or create an account

CHMER High Speed Linear Motor Drive | A5030L


or call 888-BUY-EDMS (289-3367)


Chmer A5030 L
  • 3-Axis High Speed Linear Drive Die Sinker EDM
  • All-in-one design to save occupied space by 10%
  • Highly rigid column moving structure design attached with X, Y, Z axis Linear Motors to gain high speed, backlash-free, high precision machining.
  • Cutting speed can be increased up to 4 times and high responsiveness possible by Linear Motor and air balance system. It can have good machining result on tiny and deep hole, also rib job.
  • Friendly conversation window in available. Suitable working condition easily and quickly come up by just select the type of E code.
  • Revolutionary Energy Saving HSC and ESC. Machining speed is enhanced by over 30% under identical low wear rate through controllable discharge wave.
Work Table Size (W×D) mm 650×400
Work Tank Size (W×D×H) mm 1100×640×400
Max. Job Load Size (W×D×H) mm 850×550×300
Table Travel (X,Y) mm 500×350
Table Travel (Z) mm 300
X,Y,Z Axis Drive mm X,Y,Z Axis By Linear Motor
Distance from Ram platen to work table mm 300~600
Max. Electrode Weight kg 30
Max. Work-piece Weight kg 1000
Outside Dimensions (W×D×H) mm 1860×1650×2220
Net Weight kg 2230
Pneumatic Requirement kgf/cm<sup>2</sup> 6
For Dielectric Tank -- DA53
Power Supply Unit
Max. Machining Current A 50 75 -- --
Max. Power Input KVA 5 6 -- --
Electrode Wear Rate % 0.2 0.2 -- --
Bset Surface Roughness μm/Ra 0.25 0.25 -- --
Outside Dimensions (W×D×H) mm Built in Built in -- --
Weight kg Built in Built in -- --
Volume L 480
Filter method Paper Filter
Power HP 0.5
Weight kg Built in
Outside Dimensions mm Built in

We appreciate your interest in EDM Network Inc.,
a representative will contact you.