|
|
Features
- High
Quality
- High
Speed Machining
- Best
Cost Performance
- X,Y,U,
V axes simultaneously controllable
- Easy
to Operate
|
 |
Main
Machine Body
High
Quality Machine Construction
Excellent thermal balance and high rigidity design assure consistent,
precision machining.
The
U-V axes at the upper part of the column
is designed for high rigidity, which allows
taper machining with stable accuracy even
for high water pressure and high wire tension.
High Quality Construction Improves Machining
Reliability
Ball
screw and LM guide are used, with AC servo
motor which drives the ball screw directly.
Intelligent software can realize high speed
consistent machining with high frequency
response for the best accuracy.
The discharge energy is controlled detecting each sparking, which makes
for less wire break less and gives consistent machining and uniform machining
surface.
High
rigidity drive system to secure position
accuracy of all axes. |
 |
 |
 |
| |
High
Stiffness Drive System
Laser measurement to X,Y,
U, Z axes. THK super precise Linear
guide ways, C1 grade ball screws
at X, Y axis to secure position precision. |
 |
Easy
To Wire Threading With Water Jet Assist
Reinforced design allows for a high rigidity
Z axis. This allows for large taper cutting (up to ±24° in
100 mm thickness. |
 |
 |
 |
Easy
to wire thread. |
|
Stable
wire movement with industrial hard ceramics
drive wheels & precise drive system. |
|
|
Auto
wire-collection device. User
only need to conduct wire through lower guide and used wire will
be sent to waste box. |
|
CNC
Controller
|
|
IPC
base standard 586 computer board. |
|
5X86-P75
CPU. |
|
16
Mega DRAM. |
|
High
capacity DOC (Disk On Chip). |
|
Resolution
640x480 16 colors VGA display. |
|
Operation
panel include characters, operation
and functionkeys. |
|
AC
servo motors & drivers (Panasonic). |
|
 |
|
CNC
Functions
| * |
Linear
and circular inter polation. |
* |
Cutting
conditions display. |
* |
Trace
return wire break point, retrace to start point. |
| * |
Return
to origin, cutting start point, reference point,
wire breakage point. |
* |
Day
run. |
* |
Top-bottom
independent figure
machining. |
| * |
Automatic
positioning, edge and hole centering, column
centering, slit centering. |
* |
System
date, time setting. |
* |
Machining
path magnifier, rotation, mirror image & X,
Y axis exchange. |
| * |
Machine
lock. |
* |
Cutting
locus display with color change. |
* |
Selection
servo-feed, constant-feed. |
| * |
Single
step and manual jog. |
* |
Absolute/incremental
coordinates. |
* |
Auto
select stop function. |
| * |
Display
cutting time, cutting length, cutting speed. |
* |
Multiple
sub-routine repeat calling. |
* |
Machining
path 3D view display. |
| * |
3.5" floopy
disk RS232 interface input/output. |
* |
Wire
offset compensation file can be selected within
program. |
* |
Back
ground editing. |
| * |
Marked
block jump over. |
* |
Inch/metric
exchange. |
* |
Automatic
wire verical alignment. |
| * |
Soft
travel limits. |
Machining
Functions
|
High
Speed Machining |
Easy
To Recover Wire Breakage |
MOS Type high power transistor controlled
with na~no-second can cut off peak current 600A,
by which Max. speed 250 mm /min. is attainable.
|
In case wire break occurs during machining,
wire returns to the start point after pressing
button, and moves to the break point at high
speed retracing the machining path by pressing
button.
|
|
Multi
Functions |
Easy
To Wire Thread |
By inputting wire diameter, workpiece material,
thickness, and machine classification, optimum
machining conditions can be outputted from the
memory of various machining conditions.
It is possible to output the machining conditions of 2nd, 3rd, 4th cut
with easy operation, and second cut can be automatically obtained by using
retrace function. |
Operator has only to pass a wire through
lower nozzle, then the wire can be surely fed
to wire collector with wire-carry device. |
|
AWT
(Automatic Wire Threader) |
AC
Power Supply |
|
Allows
for complete unattended operation of wire EDM.
Wire automatically thread, and retreads after
breakage through its slot or through the start
hole-operator selected. |
Anti-Corrosion
EDMing for carbides and special alloy metals. |
 |
 |
 |
| 3D or single step simulation. |
Corner centering, column centering & coordination
catching. |
Upper/Lower guides position interpolation. |
 |
 |
|
| Self-diagnostics & machining history. |
Working conditions change, path change & datum
change in machining. |
|
Remote
Control Box
|
Jog
feed & directions of X, Y, Z, U,
V five axis under remote
control. |
 |
|
Portable remote control with complete on-line
functions. |
|
Flushing, Wire feed & NC power under
remote control. |
|
|
| FLOOR
LAYOUT |
|
|
|
|
|
| ITEM: |
|
CW
- 320S |
|
| MACHINE
BODY |
|
|
|
| Axis
travel table (XxYxZ) |
mm/inch |
350
x 250 x 220 |
13.7
x 9.8 x 8.6 |
| Auxiliary
travel table |
mm/inch |
60
/ 60 |
2.4
x 2.4 |
| Max
size of workpiece |
mm/inch |
800
x 560 x 215 |
31.5
x 22 x 8.5 |
| Max
weight of workpiece |
kg/lb |
300
kg |
660
lb |
| xy
feed rate |
mm/inch |
Max
800 mm / min |
Max.
31.5 inch / min |
| Axis
drive system |
|
AC
servo motor |
AC
servo motor |
| Wire
Diameter Range |
mm/inch |
ø0.15~ø0.3 |
ø0.006~ø0.012 |
| Max.
wire feed rate |
mm/inch |
300
mm / sec |
11.8
inch / sec |
| Wire
tension |
|
300
- 2500 gf |
|
| Taper
angle |
mm/inch |
± 14.5º /
3.15 inch ± 14.5º /
3.15 inch |
(WIDE
ANGLE TAPER NOZZLE, DA+DB=15MM) |
| Machine
dimensions |
|
2100
x 2800 x 2130 |
82.6
x 110.2 x 83.8 |
| Machine
weight |
kg
/ lb |
2500
kg |
5500
lb |
| |
| Working
Fluid Supply Unit |
| Tank
Capacity |
|
|
340L |
| Filter
Element |
|
|
paper |
| Ion
Exchange Resin |
|
|
14L |
| Conductivity
Control |
|
|
Auto |
| Fluid
Temperature Control |
|
|
Standard |
| |
| Power
Supply Unit |
| Circuit
System |
|
|
Power
MOS Transistor |
| Max.
Output Current |
|
|
25A |
| IP
Select |
|
|
10 |
| Off
Time Select |
|
|
50 |
| |
| CNC
Unit |
| Data
Input |
|
|
Keyboard,
RS-232C, 3.5" Floppy Disk |
| Display |
|
|
14
- Inch Color |
| Control
System |
|
|
32
Bit, 1-CPU, Semi Closed Loop |
| Control
Axis |
|
|
X,Y,U,V,Z(5
axis) |
| Setting
Unit |
|
|
0.001mm |
| Max
Command Value |
|
|
±9999.999mm |
| Interpolation |
|
|
Linear/Circular |
| Command
System |
|
|
Abs/Inch |
| Machining
Feed Control |
|
|
Servo/Const.Feed |
| Scaling |
|
|
0.001-9999.999 |
| Auto
2nd Cut System |
|
|
Re-Trace
And Auto Changed Machining Data |
| Machining
EDM Condition Memory |
|
|
1000
- 9999 |
| Total
AC Power Input |
|
|
3Phase
220±10%/13kva |
*Specifications
subject to change based on R&D
results without notice.
 Standard
Accessories |
Options |
- Ion
Exchange Resins
- Paper
filters
- Upper/Lower
flushing nozzles
- Diamond
guides (0.26)
|
- Energizing
plates
- Diamond
guide remove jig
- Brass
wire (0.25x5kg)
- Tools
|
- Surface
finish circuit
- AVR
- Automatic
vertical Alignment jig
|
- AWT
- AC
POWER
- CE
Conformity
|
|
|
|
Standard
Accessories |
| Ion Exchange
Resins |
Energizing
plates |
| Paper
filters |
Diamond
guide remove jig |
| Upper/Lower
flushing nozzles |
Brass
Wire (0.25x5KG) |
| Diamond
guides(0.26) |
Tools |
| |
|
|
ITEM |
CW430F/S |
CW530F/S |
CW640F/S |
CW743F/S |
CW850F |
| Machine Body |
|
|
400 |
500 |
600 |
700 |
800 |
|
|
300 |
300 |
400 |
400 |
500 |
|
|
100 |
100 |
100 |
100 |
100(120) |
|
|
100 |
100 |
100 |
100 |
100(120) |
|
|
260 |
260 |
300 |
300 |
300(400) |
| Max.
Workpiece Dimensions |
mm |
|
800W
x 650D x255H |
900W
x 650D x255H |
1000W
x 700D x295H |
1050W
x 700D x295H |
1200W
x 800D x295(395)H |
|
|
500 |
550 |
650 |
800 |
1000 |
| X-Y
Axis Feed Rate |
Max.
800 mm/min |
Drive System
(5 Axis) |
AC Servo
Motor (5 axis) |
Wire Diamter
(Standard) |
 0.15-0.3mm
(0.25mm) |
Wire Feed Rate
(Max) |
300
mm/sec |
| Wire
Tension |
400-2500gf |
| Max
Taper Angle |
 24 /100mm WIDE ANGLE NOZZLE |
| Outside
Dimensions |
1400 x1750
x2130 |
1600 x1750
x2130 |
1820 x1850
x2170 |
2400 x2460
x2200 |
2200 x2180
x2370(2470) |
|
|
2500 |
2700 |
3200 |
4500 |
5000 |
| Working Fluid
Supply Unit |
| Tank
Capacity |
340L |
| Filter
Element |
Paper |
| Ion
Exchange Resin |
6.8L |
| Conductivity
Control |
Auto |
| Fluid
Temperature Control |
Auto(Standard) |
| Outside
Dimensions |
700x1830x1130(E
TYPE 620x1710x900) |
| Net
Weight (Without Water) |
300 |
| Power
Supply Unit |
| Circuit
System |
Power
MOS Transistor |
| Max.
Output Current |
25A |
| IP
Select |
10 |
| Off
Time Select |
50 |
| CNC
Unit |
| Data
Input |
keyboard,
RS-232C, 3.5-Inch Floppy Disk |
| Display |
14-Inch
Color |
| Control
System |
32bit,
1-CPU, Semi Closed Loop Software Servo System |
| Control
Axis |
X, Y,
U, V, Z (5 Axis) |
| Setting
Unit |
0.001mm |
| Max.
Command Value |
9999.999mm |
| Interpolation |
Linear/Circuler |
| Command
System |
Abs/Inch |
| Machining
Feed Control |
Servo/Const.
Feed |
| Scaling |
0.001-9999.999 |
| Auto
2nd Cut System |
Re-trace
And Auto Changed Machining Data |
| Machining
EDM Condition Memory |
1000-9999 |
| Outside
Dimensions |
820dx600wx1800h
450kg |
| Total
AC Power Input |
3 Phase 220 10%/13kva |
| OPTIONS |
|
- Large
Source Bobbin(20kg)
|
|
|
|
- AVR(Auto
Voltage Regulator)
|
|
|
|
|
|
| *Specifications
subject to change based on R&D results without
notice. |
|
|
|
|
|
|
|
