|
 |
|
 |
|
 |
The EDM Network Chmer G64S wire EDM is the world’s fastest wire EDM with thread in the gap technology. The Chmer G64S wire EDM is a true low cost EDM that has 6 axis turn and burn capabilities standard. The Chmer G64S wire EDM has large diameter ballscrews keep the machine accurate for precision EDMing for years to come. The Chmer G64S wire EDM is offered in two models, flushing or submerged, giving the Chmer G64S wire EDM flexibility in most any wire EDM application.
The auto wire threader is simple and easier to maintain than most EDMs. The Chmer G64S wire EDM is a low cost wire EDM with fast in the gap threading making the Chmer G64S wire EDM a great choice for precision EDM shops. |
|
| FEATURE: |
| 1. |
Automatic Wire Threader, Auto re-threads on location under water, threads in the kerf. |
| 2. |
W5F 6 axis control, User Friendly, 15" TFT Display. |
| 4. |
Full Functional Corner Control System. |
| 5. |
AC and DC switchable power supply. |
| 6. |
Numerical Dielectric Control easy to read and operate. |
| 7. |
U-V axes, with linear guide way for accurate taper cutting. |
|
| SPECIFICATIONS: |
MACHINE BODY |
G64S |
X, Y axis (mm)
|
600 x 400 |
U, V, Z travel
(mm) |
100 x 100 x 300 |
Max size of working piece
(W x D x H mm) |
930 x 700 x 295 |
Max weight of working piece
(kgw) |
600 / 450 |
XY Feed Rate
(mm/min) |
Max. 800 |
Motor system
(axis) |
AC Servo Motor |
| Wire diameter range (mm) |
Ø0.15 ~ 0.3 (Ø0.25) |
| Max wire feed rate |
300 |
| Wire tension (gf) |
|
| Max taper angle (�) workpiece thickness (mm) |
±21°/100 (wide-angled nozzle, DA + DB = 15mm) |
Outside dimension
(WxDxH mm) |
2550x2450x2250 / 2550x2450x2250 |
| N.W (including power and coolant system) (kgw) |
3200 |
| Coolant tank system (L) |
340/650 |
|
| POWER
SUPPLY UNIT: |
| Circuit system |
Power MOS Transistor |
Max. power
input |
25A |
| IP select |
10 |
| Off Time Select |
50 |
|
| |
| CNC UNIT: |
| Data Input |
keyboard, RS-232C, 3.5 Inch Floppy Disk |
| Display |
15 Inch Color |
| Control System |
32bit, 1 CPU, Semi Closed Loop Software Servo System |
| Control axis |
X, Y, U, V, Z (5 Axis) |
| Measurement resolution |
0.001 mm |
| Max command value |
± 9999.999 mm |
| Movement measuring system |
Linear / Circular |
| Command System |
Abs / Inch |
| Machining feed control |
Servo / Const. Feed |
| Scaling |
0.001-9999.999 |
| Machine EDM Condition Memory |
1000-9999 |
| Outside Dimensions |
820d x 600w x 1800h 450kg |
| Total AC Power Input |
3 Phase 220 ± 10% / 13 kwa |
|
| |
| Input Power |
AC 220 V ± 5 3 Phase 50/60Hz ± 1 Hz (15KVA) |
| Environment conditions |
- Optimum room temperature: 20 � 1 ° C Humidity: below 75% RH
- Minimum floor vibration
- Avoid being located against sunshine
- Systems or set in a place that recieved directly sunshine
- Clean and low dust environment
|
| Space |
Take notice of the space for machine stroke to move during normal operation and daily maintenance |
| Grounding |
- It is recommended to have a grounding resistance of 10Ω or less.
- An independent ground is recommended
- The grounding cable should be 14mm²
|
| Demand of air pressure |
Air pressue of 6kg/cm² for options of AWT and submerged machine is needed |
|
| INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE. |
|
|
|
|
|
|
 |
|
|
|
|
|
