Wire EDMs from CHMER

The EDM Network AMS Linear Motor AW9S wire EDM is the world’s fastest wire EDM with thread in the gap technology. True low cost EDM that has 6 axis turn and burn capabilities standard. The Linear Motor and glass scale keep the machine accurate for precision EDMing for years to come. The AMS Linear Motor AW9S gives the EDM flexibility in most any wire EDM application. The auto wire threader is simple and easier to maintain than most EDMs. Low cost wire EDM with fast in the gap threading makes the AMS Linear Motor AW9S a great choice for precision EDM shops.

CNC Controller

Adopt in-house CNC PC Base controller that provides state of the art features such as:
	Remote Monitoring
	CF memory card
	Rotary B-axis (6th axis)
	User Friendly in-house software for easy learning and free update.

Cutting Edge Remote Monitoring Function

Cutting Edge Remote Monitoring Function
	Real Time monitoring of machine operation without attending to the work-shop! You see what the operator sees on the CNC controller from anywhere on your home PC or laptop. It definitely gives you more freedom!
	Quick, spontaneous technical assistance of trouble-shoot through Remote monitoring plus telephone conversation with your technical people reduce down time and increase your productivity!
	Easy setup! Just install the software on your computer and get immediate access via existing Network.
	Programming N.C file with your CAD/CAM system and up-load it to the CNC controller

Double Air Tunnel

Double-Tunnel design Power Supply enhances the efficiency of thermo convection and extends life span of electronic components. Module cicuit box offers quick maintenance and least repair time.

Multi-Functional Corner Aid

Apply auto eroding power shift when approaching inner/outer corner to obtain sharp corners and small radii.

Revolutionary AWT system

Capable of threading 0.1mm brass wire in water and at break location, no need to return back to start point and trace back. Concise design of AWT makes maintenance easy and reduces down time.

Roundness Inspection

Isolated Lower Arm design for highest machining accuracy and avoid water leakage when sealing worn out.

Consumable Life Chart

The bar chart indicates the life status of each consumable and time for replacement to ensure machine working in ideal condition.

AMS in-house Rotary B-Axis

6th Axis Continuous Cut or Indexing (optional) with in-house submergable Rotary B-Axis for turns and burns.

AC-μ

Super Fine Finish eroding circuit and water volume regulator ensure stable working condition of fine-finish so as to obtain best surface roughness.

SPECIFICATIONS:
X, Y Travel	mm	920x620
U, V, Z Travel	mm	200x200x400
Max. size of workpiece	mm	L1300xW1000xH400
Max. weight of workpiece	kg	1000
Max. X,Y Rapid Traverse	mm	800 mm/min
Motor Drive System		AC servo motor 17 bit/130,000 pulse
Wire diameter range	mm	F0.15~0.3/
Max. wire feed rate	mm/in	300mm/sec
Wire tension	gf	200~2500
Taper angle	mm	±21°/140 mm
N.W (Incl. Pwr Supply)	kg	8000

CNC POWER SUPPLY:
Circuit System	power MOS Transistor
Max.Output Current	30A
Data Input	Keyboard/Touch Screen/Ethernet
Power Requirement	220V ± 5% / 3 Phase / 50 ~ 60 HZ
Memory	IDE Card Reader + CF Card
Memory Capacity	128 MB
Screen Display	15" TFT
Measurement Resolution	0.1 μm
Control System	Closed Loop
Max. Command value	± 9999.999

DIELECTRIC SUPPLY UNIT:
Filter Material	Paper
Conductivity Control	Auto
Dielectric Temp. Control	Auto (option)
Control Axis	2000 (L)
N.W	600 Kg

STANDARD ACCESSORIES: Auto vertical alignment jig x 1 set AWT (Auto Wire Thread er) x 1 set 2-in-1 AVR + Transformer x 1 set	Water Cooler x 1 set X&Y axis Glass Scale
OPTIONAL ACCESSORIES: AC-μ Super Finish Circuit 30 Kg Jumbo Wire Spooler Bridge Ruler Rotary B-Axis (6th axis Function) Touch Screen	0.1mm wire cutting device Heidenhain 0.5μ X&Y Glass Scale CE Compliance Auto Dielectric Temp Control

INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE.